How To Fix Sunbeam Electric Blanket Blinking

How To Fix Sunbeam Electric Blanket Blinking

A sunbeam electric blanket will keep you warm on a cold night so it’s frustrating not knowing how to fix the sunbeam electric blanket blinking. Most people wonder what will happen when the sunbeam electric blanket is flickering. Does it stop working or is it flickering?

The best way to troubleshoot a product is to look at the flashing lights. All these lights have their function and they flash or flash when we need them. But if they blink without working, then this is a symbol of the problem. But what do those flashing/flickering lights mean?

Are they good things or bad things? Below we will help you answer these questions and give you some tips in the process of using an electric sunbeam electric blanket that you may need. So read on for more information!

1. Why does the Sunbeam Electric Blanket Blink?

If the blanket is flickering, the main cause could be an incorrect thermostat setting. After checking that the thermostat is stable and still flickering, you should check the power supply. Because just one problem with the power supply can cause flickering or cause the electric blanket to not work properly.

When looking at the controller you need to answer the question: is it safe in the blanket’s module or is it damaged?

As we all know, most power and thermostat problems can be solved by resetting the blanket. The same cannot be said for problems related to the heat conductors inside the blanket.

Just one broken wire can create an open circuit, or a very common cause of damaged wires is washing and drying bedding the wrong way. For example, putting blankets in the washing machine and dryer can damage the heating filaments.

In many cases, blinking/blinking is innocent. It simply means the sunbeam electric blanket needs to be reset. But if the blanket still flickers after being reset, you should consider other options. It should be noted that all of the problems mentioned above can cause the blanket to stop working. In other words, you can’t ignore the strobe light.

2. How Do I Reset My Sunbeam Electric Blanket?

A very simple, easy and most common way to reset the Sunbeam electric blanket is to unplug and plug the cord into an outlet. The connection between the module and the controller must then be secured so that the blanket can turn on without problems.

This usually solves most blanket problems. But if you have done all the steps above and the problem is still not resolved, it is best to contact Sunbeam if resetting the blanket does not improve the situation. They will send staff to help you repair and maintain electric blankets as quickly as possible.

2.1. Fold Test For Sunbeam Electric Blanket

If your electric blanket won’t heat up forever, the fold test is Sunbeam’s recommendation for blankets that don’t heat up properly. This is a simple way that you can fix the problem that has completely done the repair right at home.

Here are the simple steps to fold an electric blanket at home that introduced by 9Blanket:

Step 1: Fold the blanket and find the controls

Step 2: Slide them out while still folding the blanket

Step 3: Connect the control cord to the connection module via the plastic hook and plug the power cord into the appropriate wall outlet

Step 4: Turn on the blanket and set the highest temperature for 5 minutes

Step 5: You should feel some warmth between the folds, but remember not to keep testing for more than 7 minutes.

3. Why Is My Sunbeam Heated Blanket Blinking Red?

The blanket does not receive energy or does not have enough energy. This can happen if the power cord is not plugged into a wall outlet or is plugged into a wall outlet incorrectly. In this case what we should do immediately is check the power cord and blanket. Check to see if it has any electrical problems to promptly resolve.

 The sunbeam heating blanket flashes if there is an incorrect thermostat setting, the control is not tightly connected to the module in the blanket, or there is a problem with the power supply. 

In most cases, the Sunbeam heating blanket will stop heating when the connection between the plug, the power cord, and the controller is lost. If it is loose, it may prevent the blanket from working, causing the red light to flash.

3.1. Fix The Red Light Problem

Step 1: Replacing the sunbeam blanket should be enough to possibly fix the flickering light problem. This is very simple, you just need to unplug the power cord from the wall outlet and plug it back in and make sure the circuit is not open and that there is power running in the lead.

In some cases, you must wait a few minutes before plugging the cord back into the outlet in order not to cause sudden power changes that could result in power failure.

Step 2: Gently attach the tag to the connection between the wire and the blanket. Make sure it is secure. 

Step 3: Visually inspect the blanket for any signs of damage. If you find any signs of damage, don’t hesitate to call someone who is qualified and knowledgeable about sunbeam electric blanket repair.

They will let you know the amount of damage that may be incurred if repaired. If they can’t fix the blanket or the cost is too high, you should consider buying a new one.

4. Why Is My Sunbeam Heated Blanket Blinking F1?

The F1 flickering error on the control panel of the common sunbeam blanket is caused by a bad connection between the power cord and the blanket. If that connection is loose, the console will flash an F1 warning to let you know that something is wrong.

You can get more clarification by looking at the manual. It must contain all error codes and their meanings.

4.1. F1 Troubleshooting

Step 1: Reset

You can get rid of the F1 error by resetting the blanket. This is a simple matter of unplugging the controller from the module and reconnecting it. You should also consider removing and then re-plugging the power cord into the wall outlet. Then when you turn the sunbeam blanket back on, the F1 flickering will go away.

Step 2: Professional Support

With some blankets, you have to reinstall them several times before they work. If your device has been reset many times but does not work, contact sunbeam customer support. They will provide proper instructions. They may suggest a few options that you haven’t tried yet.

5. Frequency Questions

5.1 Why Sunbeam Electric Blanket Doesn’t Stop Flickering?

Flashing occurs on the electric blanket if the power connection to the lead or related equipment is not secured. The flashing light on the sunbeam electric blanket will disappear once you reset and secure all connections. 

If your lights won’t stop flashing, consider the possibility that the internal wires are damaged or the controller is faulty. But anyway, the flash is also a sign to pay attention to, it reminds you that you need to take it to repair or maintenance that can ensure safety during use.

5.2. Why Is The Sunbeam Heating Blanket Flashing Orange?

Blinking lights usually indicate a power problem, meaning insufficient current or a disconnected plug from the controller. It can also mean loose connections. So please carefully check the connection between the devices to make sure the blanket is working properly.

You can view the following articles: